B454-CR-E Bass Trombone

Bass Trombone with Independent Conventional Rotors

B454-CR-E Bass Trombone

The B454-CR-E is built to be an uncompromising, performance-based piece of equipment capable of producing whatever is required without breaking your wallet. From earlier developments we have figured out ergonomics and what needs to happen in order to keep our signature sound.

Do not think of this valve section as “cheap”. The traditional valves keep costs economical, but our pursuit of perfection makes these 100% viable.

9½”, 10″, or 10½” bell flares are available in a variety of wall thicknesses and tempers with soldered or unsoldered rims. In addition, you may choose from yellow, rose, or red brass with a clear, lacquer finish.

Single and dual bore slides in standard weight configurations include your choice of standard brass leadpipe with further custom leadpipe options available in silver and brass.

Changing tuning slide material and design has a profound effect on instruments. Edwards has many tuning slide options available on request.

The Edwards bass trombone fulfills your current needs in an instrument yet can grow and adapt as your playing develops or you move into new musical genres.

Price

$5,800

Warranty

Lifetime

Schedule an appointment below or call (800) 562-6838 to order.

Make Appointment

Specs & Features

Bore Size

.562" or .562"/.578" bore

Leadpipe

Interchangeable leadpipe system with one leadpipe

Slides

B-STDN
The B-STDN is the standard .562" bore bass trombone slide. This slide provides a player with greater flexibility in the upper register. It is most comparable to the Bach 50 slide. The B-STDN has a yellow brass outer slide with nickel sleeves and endcrook.
B-DBN
The B-DBN is a .562"/.578" dual bore slide. This slide adds width to the sound and blows freely in the low register. The B-DBN has a yellow brass outer slide with nickel sleeves and endcrook.

Tuning Slides

Single Radius
Single Radius tuning slides are the most common. They have one continuous bend from small to large end. They are very free blowing and open in all registers.
Dual Radius
Dual Radius tuning slides have two bends. The shape is more square with the two bends making a flattened top. The dual radius provides a quicker response and ease in the upper register, however, the sound is more compact than the single radius tuning slide. All dual radius tuning slides are CF treated to offset the compact nature of this tuning slide.
Both types available in yellow or red brass

Valves

  • Enhanced Rotor Valves
  • Pitched in F and Gb (combined to make D)

Bell Weights

  • 20 Gauge - Heaviest (.031" thick)
  • 21 Gauge (.028" thick)
  • 22 Gauge (.025" thick)
  • 23 Gauge - Lightest (.022" thick)

Bell Materials

  • Yellow Brass (70% Copper / 30% Zinc)
  • Rose Brass (85% Copper / 15% Zinc)
  • Red Brass (90% Copper / 10% Zinc)

Bell Treatments

Soldered
A soldered bell tends to have a very centered sound with a lot of core (fundamental). The articulations are slightly dampened and softer with the solder, while the sound is more direct and compact.
Unsoldered
An unsoldered bell has a very wide sound with more overtones. Articulations are easier with an unsoldered rim. More near feel is apparent with these bells as the sound is wider, which helps give the player more feedback.
Tempered
Tempering occurs when a bell is spun twice on a mandrel which work hardens the bell. This adds brilliance and colour to the sound.
Double Buffed
Double buffing thins the bell slightly. It actually creates a thickness in between any two gauges.
Heat Treated
Heat treating is a baking of the entire bell. This softens the metal immensely and creates a very dark sound. This works best on heavier bells as it tends to free them up. Heat treating is not recommended on thinner bells as it makes them more prone to mute dents. The CF treatment has virtually replaced heat treating.
CF Treated
CF treating is a partial heat treating process. This treatment allows the bell to blow more freely and adds colour to the sound.

Finishes

  • RawBrass
  • Lacquer
  • Silver Plate
  • Satin Finish

“In music performance, details are everything. Edwards has provided me with an exceptional instrument that grants me complete control over what I do at all times. With their unmatched quality, refining those details has never felt easier nor more enjoyable a process.”

Eric Prodger

Ready to buy?

Schedule an appointment below or call (800) 562-6838 to order.

Make Appointment

Need accessories?

Visit our online store for instrument components and accessories.

Shop Now