Tenor Trombone T350-CR-E

Tenor Trombone T350-CR-E

The T350-CR-E is the latest addition to our symphonic tenor lineup. This instrument is built around a conventional rotor valve system and our harmonic pillar brace. It furthers our common sense approach to providing customers with a variety of options without sacrificing sound and playability.

The CR-E blends aspects of our workhorse T350-E with Getzen's Custom Reserve Tenor developed by Christan Griego. Its enhanced rotor has been improved with tweaks to port diameters, rotor passageways, and back plate inserts. This is not the same valve used on the original T350-CR model. The valve wrap allows the air to always "step" in the right direction. Couple that with just the right amount of nickel and brass in the bracing, and the end result is a horn capable of achieving the sound for which Edwards is known.

This instrument comes with a uni-harmonic pillar brace. Similar in concept to the harmonic bridge found on the T396-A and the T350-HB, this brace allows for a single harmonic pillar to be added to the horn in order to fine tune its sound and feel.

The CR-E is available with 8" or 8½" bell flares in a variety of wall thicknesses and tempers with either soldered or unsoldered rims. In addition, you may choose from yellow, rose, or red brass with a clear lacquer finish.

Single and dual bore slides in standard weight and lightweight configurations include three brass leadpipes. Custom leadpipe options are also available in silver and brass.

Finally, changing tuning slide material and design can have a profound effect on instruments. Edwards has many tuning slide options available on request.

The T350-CR-E's valve system will fit with all existing T350-E instruments. However, bell tabs will either need to be removed or filed down in order to work with this valve set.

Standard Features

Bore Size
.547" or .547"/.562" bore
Interchangeable leadpipe system with 3 leadpipes
Bell Weights
  • 21 Gauge - Heaviest (.028" thick)
  • 22 Gauge (.025" thick)
  • 23 Gauge - Lightest (.022" thick)
Bell Materials
  • Yellow Brass (70% Copper / 30% Zinc)
  • Rose Brass (85% Copper / 15% Zinc)
  • Red Brass (90% Copper / 10% Zinc)
Bell Treatments
  • Soldered
    • A soldered bell tends to have a very centered sound with a lot of core (fundamental). The articulations are slightly dampened and softer with the solder, while the sound is more direct and compact.
  • Unsoldered
    • An unsoldered bell has a very wide sound with more overtones. Articulations are easier with an unsoldered rim. More near feel is apparent with these bells as the sound is wider, which helps give the player more feedback.
  • Tempered
    • Tempering occurs when a bell is spun twice on a mandrel which work hardens the bell. This adds brilliance and colour to the sound.
  • Double Buffed
    • Double buffing thins the bell slightly. It actually creates a thickness in between any two gauges.
  • Heat Treated
    • Heat treating is a baking of the entire bell. This softens the metal immensely and creates a very dark sound. This works best on heavier bells as it tends to free them up. Heat treating is not recommended on thinner bells as it makes them more prone to mute dents. The CF treatment has virtually replaced heat treating.
  • CF Treated
    • CF treating is a partial heat treating process. This treatment allows the bell to blow more freely and adds colour to the sound.
  • Enhanced Rotor Valve
  • Pitched in F
Uni-Harmonic Pillar Brace

Similar in concept to the harmonic bridge found on the T396-A and the T350-HB, this brace allows for a single harmonic pillar to be added to the horn in order to fine tune its sound and feel.

  • T-STDN
    • The T-STDN is the standard .547" single bore slide. This slide has a more rounded end crook similar to Conn slides. Quick in response, the T-STDN blows freely in all registers. A very centered tone can be achieved with this slide.
  • T-STD-AN
    • The T-STD-AN is the standard .547" single bore all nickel slide. This trombone slide has a more rounded end crook similar to Conn slides. Quick in response, the T-STD-AN blows freely in all registers and adds the warm characteristics of the nickel slides. The intensity of the fundamental is accented with upper overtones providing a unique blend of darkenss and brilliance.
  • T-BCN
    • The T-BCN has a bass end crook similar to Bach slides. The squared-off design of this crook allows for a very open low register and a bigger sound overall than the T-STDN slides. This slide is also a .547" bore.
  • T-BC-AN
    • The T-BC-AN has the same end crook as the T-BCN but with all nickel outer tubes. This slide combines the width of blow with a centered sound and quick response never before found without these material combinations.
  • T-DBN
    • The T-DBN is a .547"/.562" dual bore slide. This slide has a bass crook and provides the biggest sound in the middle and lower registers, ideal for an orchestral second trombonist.
  • T-DB-AN
    • The T-DB-AN is also a .547"/.562" dual bore, but with all nickel outer tubes. This slide has a bass crook and provides the biggest sound in the middle and lower registers, ideal for an orchestral second trombonist.
Tuning Slides
  • Single Radius
    • Single Radius tuning slides are the most common. They have one continuous bend from small to large end. They are very free blowing and open in all registers.
  • Dual Radius
    • Dual Radius tuning slides have two bends. The shape is more square with the two bends making a flattened top. The dual radius provides a quicker response and ease in the upper register, however, the sound is more compact than the single radius tuning slide. All dual radius tuning slides are CF treated to offset the compact nature of this tuning slide.
  • Both types available in yellow or red brass
  • RawBrass
  • Lacquer
  • Silver Plate
  • Gold Plate
  • Satin Finish

Photo Gallery

All images are property of Edwards Instrument Co. Please contact us if you wish to use them on your site.

Tenor Trombone Artists

Edwards Tenor Trombone Artists range from soloists to commercial players to orchestral players. Use the following list to compare and contrast the different setups these trombonists use.

Artist Body Bell Tuning Slide Slide Leadpipe
Constantine T350 321CF Rose T-BCN T1 Silver
Alessi, Joseph T396-A
Bencze, Csaba T396-A
Bonilla, Martin T350-E 324CD Rose T-BCN T2 Alessi
Branagan, Chris T350-E 324CF Yellow Dual Radius T-BCN T2 Alessi
Brickens, Nathaniel T396-A
Bynum, Joshua T350-E 384CF Rose Single Radius T-STD-N Alessi T2
Carlson, Eric T350 303 Rose Dual Radius T-BC, T-DB T1 Brass
Chinchilla, Iván T350 336CF Rose T-BCN Unknown
Chipburn, Tony T350 372CF Rose T-BCN T2 Chipburn
Clifton, Evan T350-E 384CF Rose Single Radius T-STDN T2
Compton, Paul T350-E 321CF Rose T-STD T2 Silver
Cook, Justin T350-E 321CF Yellow Dual Radius TBC-AN T2 Brass
Crimi, Jason T396-A
Diehl, Brian T350 321CF, 336CF Rose T-BCN T3 Brass
Dixon, Joe T396-A
Duay, Jean-Philippe T350-E 321CF Rose T-STDN T1, T2 Alessi
Dugan, Michael T396-A
Faske, Bruce T396-A
Ferro, Nicola T396-A
Ganicenco, Cristian T350 324CF Rose T-BCN T2 Alessi
Gibson, Bill T350 319CF Rose T-BCN T2 Silver
Gier, David T350 321 Yellow T-BC T2 Brass
Gilbertson, James T350 320CFB Yellow T-BC T3 Brass
Gilkes, Marshall T350-E 381CF Rose T-BCN T2 Alessi
Giussani, Ermes T396-A
Griego, Christan T350 336CF Rose T-BCN T2 Alessi
Gutiérrez, Alejandro T350 384CF Yellow T-BCN T2 Alessi
Hao, Jay T396-A
Haroz, Nitzan T350 321CF, 177CF Rose Dual Radius T-BCN T1 Silver, T2 Brass
Hearn, Barry T396-A
Houlding, Chris T350 335CF Rose T-STDN T2 Brass
Hudson, Rodney T350 321CF Rose T-BCN
Hughes, Joe T350-E 333CF Rose T-BCN T2 Brass
Immel, Don T350-E 381CF Rose T-STD Custom
Jeffs, Stan T396-A
Jennings, Art T350 380CF, 118CF Yellow T-STD T3 Silver
Johnson, Adam T350-E 336CFB Rose TBC Custom
Kaplan, Allan T350-E 371CF Yellow T327-2N T2 Brass
Lange, Stephen T350-HB
Lasch, Brittany T350-HB 372CF Yellow Single Radius T1 Brass
Lee, Jeanie T350-E 333CF Yellow Single Radius T-DBN T2 Brass
Mannix, Natalie T396-A
Mannix, Natalie T396-A
Mazzocchi, Anthony T350-E 369CF Yellow Dual Radius T-BCN T2 Custom
Meyers, Marc T350 319CF Rose T-BCN T2 Alessi
Mulcahy, Craig T396-A
Murray, David T350-HB 384CF Rose Single Radius T-BCN (yellow brass crook) T2 Brass
Myers, Timothy T396-A
Neel, Douglas T350-E 382CF Yellow Single Radius T-BCN T3 Brass
Oft, Toby T350-HB 321CF Rose Single Radius T-BCN
Osborne, Ben T396-A
Perkel, David T350-E 335CF Rose Dual Radius T-BC-AN T2 Alessi
Pire, Alain T396-A
Randazzo, Jonathan T396-A
Raycraft, Jonathan T396-A
Reynolds, Hal T350 321CF Yellow T-BCN T2 Brass
Riccobono, Thomas T350 336CF Rose T-BCN T2 Alessi
Roberts, James T350 336CF, 383CF Rose T-DBN T2 Silver
Robertson, Jemmie T396-A
Rodríguez, Leonel T350 334CF Yellow T-BCN T2 Alessi
Rodriguez, Joseph T350-E 384CF Yellow T-STD T2 Silver
Rogers, Lee T396-A
Ross, Mitch T350 369CF Rose T-STD
Sampó, Fabio T350-E 382CF Yellow T-STDN T2 Brass
Schlosser, Samuel T350-E 321CF Rose Dual Radius T-BCN T2 Brass
Scipioni, Gianluca T396-A
Scipioni, Gianluca T396-A
Scott, James T350-E 321CF Rose T-BCN T2 Alessi
Sharp, Russell T396-A
Shelsta, Scott T350-E 324CF Rose T-BCN T3 Brass
Siefert, Oliver T350 335CF Yellow T-BC-AN T2 Alessi
Sisk, David T350 372CF, 384CF Rose T-BCN T2 Alessi
Stewart, Amanda T396-A
Szabo, Zsolt T350-E 372CF Rose Single Radius T-BCN T2 Brass
Tartaglia, Alex T350-HB 321CF, 144CF Rose Single Radius T-BCN Rose T3 Brass
Taylor, Debra T350-E 381CF Unknown Red Brass T2 Silver
Timmons, Will T396-A
Triplett, Anthony T350-E 372CF Yellow Single Radius T-BCN T2 Silver
Vera, Sebastian T350-E 324CF Yellow Dual Radius T-BCN T2 Silver
Villers, Nicolas B502-I
Wilson, Jeremy T350-E 321CF Rose T-STDN T2 Silver
Yoo, Jeon-Sik T396-A
Zugger, Thomas T350-E 336CF Yellow T-BCN T2 Brass
Base Price:
Contact us for price (US Customers)
International customers should contact a dealer in your area for your pricing.
Ships in 90-120 days

Read warranty and return policy information

Visit our online store for instrument components and accessories.

Shop Now

Feel like a Test Drive?

Visit the Edwards Pro Stop and work one-one-one with Christan or Michael.

Contact us to set up an appointment.

Latest Blog Post

2018 Georgia Trombone Summit to Feature BSO Section, Gilkes, Resonant Projection

Edwards is proud to be a sponsor of the 2018 Georgia Trombone Summit, which will take place at the University of Georgia on May 23 – 26.┬áThis four-day event, hosted by Josh Bynum, will feature a stellar cast of musicians, including the Boston Symphony Orchestra trombone section (Toby Oft, Stephen Lange, and James Markey), Marshall […] more ››

In Their Own Words

Marshall Gilkes

"The Edwards trombone is a great horn. It plays with ease, consistency, and a pure rich sound that makes my job more enjoyable."

Marshall Gilkes
New York Freelance Trombonist