Note: Your browser does not support W3C standards. Although the content of the Edwards Instrument site is accessible to all versions of every browser, it looks best when viewed by a browser that supports these standards.
Tenor Kit:$75.00 Bass Kit:$150.00 Availability: Usually ships in 2-3 weeks
In-House Conversion Options:
Tenor Option 1 ($150): Installing in this
manner is the most simple procedure. The Edge Brace will be
soldered into place and the valve tab removed without removing
the lacquer from the entire valve section. There will be some
slight discoloration to the existing lacquer upon completion.
Tenor Option 2 ($250): Same as above, except
all lacquer is removed before installation. Upon completion,
the valve section is buffed and lacquered, making the valve
section appear brand new.
Bass Option 1 ($300): Installing in this
manner is the most simple procedure. The Edge Braces will be
soldered into place and the valve tabs removed without removing
the lacquer from the entire valve section. There will be some
slight discoloration to the existing lacquer upon completion.
Bass Option 2 ($450): Same as above, except
all lacquer is removed before installation. Upon completion,
the valve section is buffed and lacquered, making the valve
section appear brand new.
Contact us to receive an RMA
number and make arrangements to send your valve section to the
factory. If there is a professional repairman in your area, you
may purchase
the conversion kit online.
In-House Conversion Options: