Posts Tagged ‘Maintenance’

Risk vs. Reward: Buying a Used Edwards

Tuesday, March 24th, 2009

The recent banking woes have everyone worried about money (well, some people aren’t, but not many of them play music for a living). Many musicians that were thinking of buying an instrument have either put that thought aside or are considering buying used instead. Doing the latter will definitely save you some money, but be sure you weigh the risk vs. the reward.

We rarely have a day where we don’t hear from someone asking about a used horn they’ve just purchased. Usually, the call goes something like this:

Caller: “I’d like to ask some information about the Edwards I just purchased from Joe Schmoe.”

Christan: “Sure. Please tell me the model, serial number, bell markings, tuning slide color/shape, and slide markings.”

After receiving this information, I’ll be able to tell you quite a bit about the horn. But I probably can’t tell you how it was treated and maintained since it left our shop.

FYI, our serial numbers give you the year and month the valve section was built. For example, a bass valve section I just saw at ETW was 2904003. It was built in 1992 (I know, the year is backwards) on April 3rd.

The Edwards bass I mentioned above had very little lacquer left on it. It was clear that the horn could stand some TLC: valve work (and possible replacement), lacquer stripping, buffing, degreasing and re-lacquering. But the horn was purchased for $2500, so the buyer definitely saved some money.

If someone were to see the above horn and base their opinion of our company solely on it, they might think that Edwards quality is not what it should be. But once a horn is shipped, it is at the mercy of its owner. Many of our customers treat their horns like a member of the family, but we’ve seen more than a few coming back to us in desperate need of attention.

For the sake of argument, let’s say two T350’s were shipped the same day to “Richard” and “Linda”. Both players followed our advice and maintained their instruments properly. However, the two players couldn’t be more different…

“Richard”, a typical high school student, plays his instrument for 45-60 minutes day. We’ll round this to five hours a week. He takes summers and Christmas breaks off, so we’ll say he’s on the horn 37 weeks a year. Five hours a week for 37 weeks means “Richard” uses his horn 185 hours a year.

“Linda”, a professional trombonist, practices/performs on her instrument an average of 5 hours a day, or 30 hours a week (she gets Mondays off). Since “Linda” has to make a living on the horn, she’s off the horn far less than “Richard”, let’s say only four weeks out of the year. Thirty hours a week for 48 weeks a year means “Linda” is on the horn 1,440 hours a year.

“Richard’s” horn is the same age as “Linda’s”, but that doesn’t tell the complete story. It would take 7.8 years of the student’s practice schedule to equal one year of the professional’s. Let’s equate the student’s usage to a typical year driving a car (12,000 miles). By comparison, the professional’s car would have 93,600 miles after the first year.

Makes you wish we installed odometers!

Regardless, if you are purchasing a used Edwards that was made in 1992 — and it is now 2009 — you can be sure that there are a lot of miles on the horn. Some work may be needed to get it back to its original state. Our instruments are made to stand up to professionals, but no instrument will maintain it’s “like new” integrity with the normal usage of a pro. To current Edwards owners, you can offset the wear and tear by adhering to our maintenance schedule. Here are some highlights:

  • Have your hand slide checked and (if needed) straightened once a year. Tubes that aren’t aligned properly are the main source of premature slide wear.
  • Have your valve(s) checked every 4 to 6 years.
  • Keep all your tuning slides lubed and push them in every time you put your instrument in the case.

If you notice something not quite right with your horn, take care of the issue(s) sooner rather than later. Your instrument will work for you much longer than that of someone that neglects to maintain his/her horn. Maintaining your instrument will also maintain its resale value.

Purchasing a used instrument boils down to risk vs. reward. We want you to be happy with your Edwards whether you purchase it from us or from a third party. Just do your research and try to make the best decision. Also, keep in mind that we’re always here to help you make that decision.

Cleaning an Axial Flow Valve, Part 2

Tuesday, March 3rd, 2009

And the conclusion…

Cleaning an Axial Flow Valve, Part 1

Tuesday, March 3rd, 2009

One of the most important videos we’ll post…

Amada Waterkey Overhaul

Friday, February 20th, 2009

Ron explains how to maintain an Amado waterkey:

Trumpet Lever Waterkey Overhaul

Friday, February 20th, 2009

In this video, Ron provides instructions on maintaining a trumpet lever waterkey:

Replacing Your Spit Valve Cork and Spring

Wednesday, February 18th, 2009

Be careful with those springs… they can be quite sharp!

Replacing Your Trombone Slide Felts

Wednesday, February 18th, 2009

Christan shows you how to save a few bucks the next time your slide felts wear a little thin:

Oiling Your Tenor Axial Flow Valves

Wednesday, February 18th, 2009

Next, Ron teaches us how to maintain your tenor valve:

Oiling Your Bass Axial Flow Valves

Wednesday, February 18th, 2009

Next up… keeping those bass Thayers flying:

Is Your Mouthpiece or Leadpipe Stuck?

Wednesday, February 18th, 2009

Our next video focuses on a question we’re asked pretty often… How do I remove a stuck leadpipe? Christan answers that and more in this video.